GODIAG GT105 OBD Assistant ECU IMMO Prog AD ECU Connector GODIAG GT105 OBD II Break Out Box work with Panda for Power Supply

GODIAG GT105 OBD Assistant ECU IMMO Prog AD ECU Connector equipped with PWM+(PIN2), CANH(PIN6), CANL(PIN14), K-line(PIN7) signal communication indicators. GODIAG GT105 OBD II Break Out Box Converts Car Battery to 12V DC Power Supply for Xhorse VVDI Tools. OBD2Store.com GODIAG GT105 OBD Assistant ECU IMMO Prog AD ECU Connector GODIAG GT105 OBD II Break Out Box work with Panda for Power Supply.

GODIAG ECU IMMO Prog AD GT105 OBD II Break Out Box ECU Connector GODIAG GT105 OBDII Breakout Testing Box For Automotive IMMO ECU

GODIAG ECU IMMO Prog AD GT105 OBD II Break Out Box ECU Connector GODIAG GT105 OBDII Breakout Testing Box For Automotive IMMO ECU

OBD2Store.com GODIAG GT105 OBD II Break Out Box Introduction:

 

GODIAG ECU IMMO Prog AD GT105 is a special connection adapter developed for automobile maintenance technicians, anti-theft matching technicians, ECU programming engineers, etc. It is specially used to short-circuit OBD. Each button on the gadget represents a different short-circuit method. Since the power source of the product can be converted from a battery to a DC 12V power supply, it can also be used to charge some tablets or supply power for independent diagnostic equipment. As your OBD power plug assistant, it is really convenient.

 

The product is equipped with PWM+(PIN2), CANH(PIN6), CANL(PIN14), K-line(PIN7) signal communication indicators. When there is data communication, the corresponding protocol indicator will flash, therefore the communication status can be judged and you can also determine whether the diagnostic programming device is able to communicate.

 

GT105 is suitable for outdoor work, taking power from the car battery and converting it into a DC12V power supply for 12V charging, programming power, or independent power supply for diagnostic equipment.

OBD2Store.com GODIAG GT105 OBD Assistant ECU IMMO Prog AD ECU Connector Highlights：

A full-protocol ECU connection line for ECU programming power adjustment

OBD2 independent PIN 4 body GND, PIN5 signal GND for special programming of some modules.

PIN4 and PIN5 can be switched between short-circuit and non-short-circuit. 

Standard OBD2 independent PIN4, PIN5.

Pure copper female seat supports repeated insertion and removal, and has a long service life.

Battery clip treated with environmentally friendly salt spray, with a thickness of 0.5mm.

The DC car battery cable adopts 0.75mm² 2-core sheathed cable, which supports DC5.5*2.5/ DC5.5*2.1 interface.

The DC connector has a resettable 7A fuse.

DC power interface, dedicated laboratory power connector.

GODIAG ECU IMMO Prog AD GT105 OBD II Break Out Box ECU Connector GODIAG GT105 from obd2store.com Advantages:

1: You can use the power clip to provide power support for the Xhorse Panda key cutting machine, key tool plus.etc.

2: It can use the power clip to connect the battery to provide external 12V power support for the programmer.

3: According to your own needs, you can short-circuit XX XX XX XX of OBD without wiring, just plug in the plug button.

4: The OBD plug can also be referred to as the communication status of the OBD port. When the vehicle does not communicate, it is judged whether it is a problem with the vehicle or a problem with the equipment.

www.OBD2Store.com-- China OBD2 Tool, Automotive Diagnostic Tools, Car Key Programmer, OBD2 ECU chip tuning tool Center.

Contact information:

Website: www.obd2store.com

Email: chinaobd2store@gmail.com

Skype: sales-obd2store@outlook.com

Whatapp/Wechat: +86-13682550935